Furibee X215 Outdoor Test Flight LOS

What do you think this Furibee X215 Outdoor Test Flight LOS video?

Furibee X215 Outdoor Test Flight LOS

Get it here: http://shrsl.com/k500

Get it from Gearbest : https://www.gearbest.com/brushless-fpv-racer/pp_708379.html?lkid=11456898

Description:
FuriBee X215 Pro features the latest high-performance components, bringing you unprecedented FPV racing. With 3K carbon fiber material imported from England, reinforced by the aluminum parts, the airframe contributes to much higher maneuverability as well as the marvelous Holybro F4 FC and 4-in-1 BLHeli – S 30A DShot ESC. The combination of the most powerful 2206 brushless motors and aerodynamic three-blade propellers generate tremendous thrust for breathtaking high-speed flying. 1200TVL CCD camera, 5.8G video transmitter and pagoda antenna allow you to get the high-quality image and get it transmitted without latency.

Main Features:
‚󏬆Superior 3K carbon fiber frame, 30 percent lighter, 50 percent stronger, with 4mm thick arm, solid aluminum parts
‚󏬆Advanced flight control system¬†consists of Holybro Kakute F4 FC, 4-in-1 BLHeli – S 30A DShot ESC
‚󏬆Efficient propulsion system¬†– 2206 2600KV high KV brushless motor and 5048 three-blade propeller
‚󏬆1200TVL CCD camera, 5.8G FPV from¬†more than 2km¬†away,¬†omnidirectional¬†signal coverage

Specifications:
General
Brushless motor: 2206 2600KV
Propeller: 5048 three-blade, PC + fiberglass
Video transmitter: 5.8G 40CH 0 / 25mW / 300mW
Antenna type: pagoda antenna
2-in-1 LED buzzer: with four WS2812B LEDs, 4.5 – 5.2V input
Camera mount for GoPro Session: yes

Carbon Fiber Frame
Wheelbase: 215mm
Weight: 95g
Size: 175 x 225 x 60mm
Arm thickness: 4mm
Lateral plate thickness: 1.5mm
Aluminum part width: 5mm

Holybro Kakute F4 Flight Controller
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 ( SPI ), up to 32KHz
Input voltage: 7 – 42V
Supported firmware: BetaFlight ( pre-loaded ), CleanFlight
Integrated OSD: yes
BLHeli – S pass-through: support
Automatic voltage monitoring: yes
BEC output: 5V 1.5A, 3.3V 200mA
Mounting hole spacing: 30.5mm

FrSky XM+ Receiver
Number of channels: up to 16
Operating voltage: 3.7 – 10V
Operating current: 30mA at 5V
RSSI output: analog 0 – 3.3V
Firmware upgradable: yes
Compatibility: FrSky D16 Mode
Receive distance: 1.5km

2-in-1 LED Buzzer Module
LED strip model: WD2812B
Operating voltage: 4.5 – 5.2V

FPV Camera
Image sensor: Super HAD II CCD
Horizontal resolution: 1200TVL
TV system: PAL / NTSC
5D-OSD button: yes
Input voltage: 12V DC

Specification

General

Brand: FuriBee 
Type: Frame Kit 
Version: BNF

Motor

Model: 2206 
Motor Type: Brushless Motor 
KV: 2600

Flight Controller

Flight Controller Type: F4

Camera

Video Resolution: 1200TVL ( horizontal ) 
Sensor: CCD

Electronic Speed Controller

Firmware: BLHeli-S 
Continuous Current: 30A

Dimension and Weight

Product weight: 0.4900 kg 
Package weight: 0.5300 kg 
Product size (L x W x H): 28.00 x 24.00 x 16.00 cm / 11.02 x 9.45 x 6.3 inches 
Package size (L x W x H): 30.00 x 25.00 x 18.00 cm / 11.81 x 9.84 x 7.09 inches

Package Contents

Package Contents: 1 x X215 PRO FPV Racing Drone, 1 x 5.8G Pagoda Antenna, 1 x Camera Mount, 1 x FrSky XM+ Receiver

Product Safety Disclaimer: 
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Small Parts Disclaimer: 
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

Be sure to share this Furibee X215 Outdoor Test Flight LOS video!