Unboxing #285

What do you think this Unboxing #285 video?

Unboxing #285

Get the 95GF here: http://shrsl.com/m3i4

Website description:

SPC MAKER 95GF is an extraordinary brushless indoor FPV racing drone with a carbon fiber frame which features the thick chassis and impact resistance. The OMNIBUS F3 flight controller can keep the drone well-balanced in the air, and micro brushless motors can be controlled accurately by the 4-in-1 BLHeli – S 10A ESC via the latest digital signals. It is more superior to 95X, since the racer is equipped with RunCam Micro Swift 600TVL CCD camera which features excellent image quality and low latency, bringing you more enjoyable FPV.

Specifications:
Weight: 72g ( without battery ), 105g ( with battery )
Brushless motor: SPC Maker S1104 7500KV 
Brushless ESC: 4-in-1 BLHeli – S 10A DShot
Propeller: 2035 50mm four-blade
Video transmitter: 5.8G 48CH 25mW / 200mW
Image transmission range: 100 – 200m
Battery: 11.1V 350mAh 30C LiPo

3K Carbon Fiber Frame
Wheelbase: 95mm
Bottom plate thickness: 3mm
Top plate thickness: 2mm

OMNIBUS F3 Flight Controller
CPU: STM32F3CCT6, 256K flash
IMU: MPU6000 ( SPI )
Version: 6DOF ( no barometer nor compass )
OSD: BetaFlight OSD
Firmware: BetaFlight 3.1.0 OMNIBUS
LC filter: yes
BEC output: 5V 1A BEC
Mounting hole: 2.5mm diameter, 20mm spacing
LED strip: support
Buzzer: support

4-in-1 BLHeli – S ESC
Processor: EFM8BB21F16G
MOSFET: TPN2R703NL
Driver: new-generation 3-in-1 MOSFET
BEC output: no
Continuous current: 4 x 10A 
Burst current: 4 x 15A ( up to 5 seconds )
Supported control signals: DShot, Oneshot
Input voltage: 2 – 4S LiPo / HV LiPo

RunCam Micro Swift 2 FPV Camera
Image sensor: 1/3 inch Super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.3mm, 145-degree FOV
TV system:NTSC
S/N ratio: more than 60dB ( AGC off )
Min. illumination:0.01 lux at 1.2F
WDR: D-WDR
DNR: 2DNR
Input voltage: 5 – 36V DC

Be sure to share this Unboxing #285 video!